November 16, 2022 Amit Bhagalia

How to Set Up a New Mod and Tank?

Today, you will learn how to set up a new vape mod and tank. This process can be daunting at first, but after reading this article, you'll know all you need to know to pick out the correct vape setup. Before you get started, it's important to note that there are two different styles of vaping tanks: top coil and bottom coil.

Full coil tanks are less standard but generally easier to use and maintain. Bottom coil tanks are more popular than top ones because they're easier to fill with e-liquid.

First, push down the airflow control ring on the tank with your thumb or pointer finger, creating a hole between the drip tip and the tube inside your atomizer. Once you have done this, screw your new coil into the top of your mod, and then screw your new tank onto it.

Finally, you are ready to fill up with some e-juice and have it flowing through your device. You can use the airflow control ring to adjust how much juice is flowing through your device, so if you want less or more airflow, twist it in one direction or another.

The next step is to fill up your tank with some e-juice. You can use any juice you like, but it is best to use a high-quality brand like Kangertech or Aspire. Carefully pour the e-juice into the top of the tank until it reaches just below the centre line of your tank (this should be about 3/4 complete). Once you have filled up the tank, it is time to screw on the top. It would be best if you gently pushed down on it until it clicked into place.

At this point, you are ready to start vaping. Press down on your fire button five times rapidly to get the coils going, and then adjust your airflow control ring so that less juice flows through it (this will give you more vapour).

Well, there you have it. To get started with vaping, you need a vape mod, e-liquid, and a vape tank (or atomizer). If you're still unsure which setup is best for you, feel free to leave a comment below.

Hopefully, this has helped answer some of your questions and give you a good idea of where to start.